HowTo: Jailbreak iPhone OS 3.0 Including iPhone 3Gs With redsn0w 0.8 [Mac]

Using this tutorial , you can jailbreak and unlock iPhone EDGE, iPhone 3G, iTouch 1G/2G and iPhone 3Gs on Mac with RedSn0w Redsn0w 0.8, .Before you proceed, you must have installed the original 3.0. To do this you simply open iTunes and click Update.

ATTENTION: also read HowTo: Jailbreak iPhone OS 3.0 Including iPhone 3Gs With redsn0w 0.8 [Windows]

Using this tutorial , you can jailbreak and unlock iPhone EDGE, iPhone 3G, iTouch 1G/2G and iPhone 3Gs on Mac with RedSn0w Redsn0w 0.8, .Before you proceed, you must have installed the original 3.0. To do this you simply open iTunes and click Update.

Download: Redsn0w 0.8 mac

Download iPhone OS 3.0 FW:

  • iPhone EDGE
  • iPhone 3G
  • iPhone 3Gs
  • iTouch 1G
  • iTouch 2G

Step 1

If you have not already, download the original firmware 3.0 on the desktop of your computer, and in the case you have an iPhone EDGE, you also need to download the two Bootloader files: bl39.bin and bl46.bin

Step 2

Connect your device to your PC via USB

Step 3

Run the application and click on Browse. Select the original 3.0 firmware from the desktop of your computer and then click Next

Step 4

Start an automatic process (and very fast) in which is the kernel is downloaded and patched

Subsequently, a new screen. Cydia is already selected and you can optionally install Icy. NOTE: If you have an EDGE iPhone will need to check the “Unlock Phone”.

Step 5

Click once on Next and make sure that your iPhone is plugged into the computer. You will see the instructions to put the device in Recovery Mode (in the case of an iPhone 3GS) or DFU. This is how you do it:

To enter Recovery Mode you must:

  • disconnect the device from the computer and turn it off
  • press the Home button simultaneously and insert the USB cable into the device. Continue to hold the Home button until you see a pop-up in iTunes.

To enter DFU instead you must:

  • disconnect the device from the computer and turn it off
  • press home button, than home + power, than release power just hold home button

As you can see there are no changes compared to the previous version, but thanks to redsn0w 0.8, now we can jailbreak and unlock all iPhone (including the 3Gs). All users who have a SIM lock, can download Ultrasn0w  from Cydia, which will allow them  to instantly use any SIM in their phone.



SUPPORT FSM

Monero (XMR) 43GnqUNJrTi9QyL7kEH8vM8pgWGCE6bjv1FSRipeNMM4TTeNnUVsRBb6MfMpQYxtLE7ReonxVVSXz2rFCEdW5H11LC3x73b
Bitcoin (BTC) 3PvaJPytg4pApTP5yCGpr62pRtudMgyfMQ
Ethereum (ETH) 0xd3c8677A4CfD9e8b4dFBb7720be2adb490Bd36b2