paste - FSMdotCOM

📅 January 29, 2009

Do Not Update to Firmware 2.2.1

The Dev-Team has announced that the new firmware 2.2.1 closes the “Injection hole” used by yellowsn0w to unlock 3G iPhones. While the “injection hole” still exists in the 1st gen iPhones you still should not upgrade until the Dev-Team updates the Pwns. You have been warned. It usually takes 24 to 48 hours for the Dev-Team to update the Pwns. So just sit back and relax, they are working on it. NO update ICON

If you are on an official carrier the unlock is of no importance to you. In a day or two (hopefully) QuickPwn will be updated to use the new 2.2.1 firmware.You will be able to update then, and rejailbreak.

If you need the unlock hold off on any updates until otherwise given the go ahead. Updating will result in your iPhone being locked and unusable on your nonofficial carrier. In the past Pwnagetool has been able to update while preserving the baseband of your iPhone. I can not state this will be the case for the new Firmware. The closing of the “injection hole” sounds more like Apple didn’t update the baseband, but just secured the vulnerability in the 2.2 firmware.

You might ask why would Apple only block the unlock and not jailbreaking also. Well Apple has contracts with carriers all over the world to be the only carriers that offer service for the 3G. Apple doesn’t want to stop jailbreaking because it voids your warranty. Basically the same as if you bought a brand new 3G and went out in the parking lot and smashed it on the ground. Apple isn’t going to replace it. If you break your iPhone you have to buy another, and that makes Apple more money. If you unlock your phone Apple loses money, because if they don’t stop you they get sued by the carriers. It’s your iPhone you can do what ever you want with it. Apple just has to cover their butts and try to keep them locked to official carriers.

I hope this not only convinced you to wait on your firmware upgrade, but also explained to you why you should always hold off until the Dev-Team has had time to update the Pwns to work with the new firmwares. New features are fine and dandy as long as they don’t take away all the other nifty features you have added.

📅 January 23, 2009

hClipboard – Globally Copy and Paste for iPhoneOS

New day, new app in Cydia and it’s called hClipboard. hClipboard is a globally copy and paste solution for the iPhoneOS 2.2 based on iKeyEx.When the keyboard appears, switch to hClipboard by tapping the International button ( the Globe ). Than hit the copy button and now the entire text should now appear on the top of the clipboard.

Copying a portion of text

Move to the begining of the range of text that you want to copy. Than tap the “select from here…” button, than move to the end and than tap the ” select to here…” button and “copy” button ( which is the same button ) again. You can use the “move to begining” and “move to end” button to aid navigation.

Copying Webpage Content

You have to install a bookmarlet in order to copy from a webpage content. See CopyingTextFromSafari for instruction

Pasting

Just tap any item from the clipboard to paste it. The item just paste will move to the top of the clipboard.

Deleting from Clipboard

Swipe horizontally on any items will reveal a “Delete” button. Tap this button and the item will be gone.

Templates

hClipboard supports a secondary clipboard called Templates. Hit the Switch to Templates/Clipboard button on the lower left corner to switch between the two.The main difference between Templates and Clipboard is that Templates can hold infinitely many items, while Clipboard has an upper limit of 10 items. Therefore, Templates is better for storing more permanent text like user name while Clipboard is better for temporary things like activation codes.

📅 January 20, 2009

Clippy – Copy and Paste for iPhone

New day, new app in Cydia. It is called Clippy and its still in Beta. The app crashed my iPhone, so i wont review it for you. My friend iRoc did an amazing job reviewing this app. I think that he should be reviewing more apps for FSMdotCOM. What do you think ? 😀

What’s that? Well it’s the copy and paste function that Apple left out of the iPhone’s OS? Well fret no more, because there’s a new app in Cydia that’s out to fix this problem for you. Clippy Beta is it what the Dr. ordered?

Continue reading “Clippy – Copy and Paste for iPhone”

📅 December 18, 2008

CRACK iRealSMS 2.0.6

METHOD 1 tested by Funky Space Monkey dot COM readers and it’s working

Download this

HOW TO APPLY CRACK? ( explanation by kmichalec )

I originally had the Xsellize cracked version 2.0 installed.
When I decided I was going to try this, first thing I did, was uninstall that xsellize one.
Then, I went and installed the standard, legit version 2.0.6.2 through Cydia.
But, again, the key is, once it’s done installing, and sitting at the RESTART SPRINGBOARD prompt, DO NOT RESTART IT YET!!
Then, you WinSCP into the phone.
Make sure you have the cracked file uncompressed somewhere on your PC.
Using WinSCP, copy over the files in the folders in the Applications and Library folders to the same folders on the iPhone. If you do this correctly, it will say that they already exist, and do you want to overwrite them. Say YES ALL.
Next, open up the .SH file, so that it opens in a notepad type viewer in WinSCP.
I only highlighted each chmod line, as the others just seem to be a copy from your PC to your iPhone, and you already copied the files manually in step 7. Highlight the first CHMOD line, and copy it.
Switch back to the right hand window in WinSCP (the iPhone side), and right click on any folder, select Custom Commands and then Execute.
Once you have the execute box up, paste in the line you copied from step 9 and hit run.
Repeat for second CHMOD line in the .SH file.
Once you have run both, you should be done. Now you can hit RESTART SPRINGBOARD on your phone, and it should be working.

Hope this helps. This is exactly how I did it, and I have a full working copy. In fact, even if you installed the 2.0.6.2 version and accidentally hit RESTART SPRINGBOARD before you do the copy and CHMOD, you should be ok. I accidentally did that too. I just completely uninstalled the app through Cydia, and then WinSCP’ed into the phone, and manually deleted any leftover iREalSMS folder still left after the deinstall. Once that was done, I just reinstalled the app through Cydia again, but this time, stopped before RESTART SPRINGBOARD. Then, just follow the directions above.

METHOD 2

Install 2.0.6 from cydia ( latest ) .
Download this and this ( alt. link )
SSH every file to the corresponding directory.
SET 4755 permissions to iRealSMS_ ( /Applications/iRealSMS ).
SET 0755 to iRealSMS.dylib. ( /Library/MobileSubstrate/dynamiclibraries ).

Thanks to Amit Unnadkat ( www.foreignbornindian.blogspot.com )

METHOD 3 tested by yours truly and it’s working ( quick reply too )

add xsellize source in cydia ( if you didnt already do that ).
install iRealSMS 2.0.6 from xsellize.
click purchase and then activate untill it asks you for a key code
enter key : 6D88Op5Wxup ( please note that there are no 0 (zero) in this key and that it is case-sensitive ; meaning that you need to type the code exactly as you see it there ).
once it says that the key is valid and your activated, reboot iphone and voila.

Read Crack iRealSMS 2.0.7.1 here

📅 December 14, 2008

BOOST MOBILESAFARI FOR iPhone

One essential app in our beloved iPhone is , of course, MobileSafari. But , what can it do for you? How efficient are you when you are using it? Let’s take a look on how we can boost its features, and make you a more efficient user.

How can you do that? With just one pack of addons found in Cydia. You can find the package on the iSpazio repository and it is called Safari Addon Plugins. This package adds a variety number of new bookmarks. They are javascript that will allow users to do a lot things in Safari, like :

Tabulate – open link in new tabs
Copy-Paste – the new method to copy and paste offered by PasteBud
Find in this page : search words in a page
Translate to english : automatically translate the site you are visiting in english
Open in new tab : similar to tabulate
Image search : search for images in google Google Images with just one tap
Search in WikiPedia
iTransmogrify : first method to play flash videos in MobileSafari
Find similar sites
Dictionary
Display all images : shows only the images on a page

Continue reading “BOOST MOBILESAFARI FOR iPhone”

📅 December 12, 2008

PASTEBUD – COPY AND PASTE FOR YOUR iPhone/iPod Touch – FIRST LOOK

Yesterday i presented you the proof of copy-paste concept on iPhone and iPod touch. Well today that become reality for me and some other people that had the opportunity to test it.

So what exactly is PasteBud, how does it work and what does it do exactly? Well it is a piece of javascript that enables the copy paste feature on your iPhone/iPod touch. You can copy text from any webpage in MobileSafari and than paste it into Mail.

PasteBud does not require a jailbreak device. If you are on a jailbreaked device, don’t worry this will work. There might be a free version and a premium version of PasteBud, but since this will be available for everybody only in a few hours from now , i don’t have any info on that.

Continue reading “PASTEBUD – COPY AND PASTE FOR YOUR iPhone/iPod Touch – FIRST LOOK”

📅 December 11, 2008

iPhone COPY AND PASTE – PROOF OF CONCEPT

iPhone Copy and Paste – Proof of Concept from FunkySpaceMonkey on Vimeo.

IT IS HERE!!!! Copy and Paste between Safari and Mail w/ out any additional software installation and it is legal. ( like sombody cares lol ). I don’t know too many things on this. All i know that it has a website and the grand opening will be on firday. I really can’t wait too see what’s really going on w/ this.

If you on twitter and you curious about this, follow @pastebud. And since we on this subject you can follow me as well @murdamw. 😀 .